Free shipping from 150,00 €
30 days free return shipment
Newsletter subscribe and benefit!
Private Business

KATHREIN

Set filters
{{#if tags}} {{#each tags}} {{/each}} {{#if showButton}} Reset all filters {{/if}} {{/if}}
Kathrein EXD 154 SAT multiswitch
Kathrein EXD 154 SAT multiswitch
  • Universal multi-switch with automatic operating recognition. A standard TV or 16 receivers can be operated at each connection in single-cable mode.
  • All signaling types are supported and automatically recognized: 14/18 V, 0/22 kHz (Legacy), DiSEqC 1.0, one-cable standards according to EN 50494, as well as the extended command set according to EN 50607 (SCD2 or also JESS); additionally, the use of PIN codes in single-cable operation is possible. Latest IC technology with full-band capturing provides for best signal quality. The inputs are broadband and can also be operated with wideband LNB (e.g. UAS 582). Thus, a multi-feed system can be implemented; (for two LNB the TV must support either DiSEqC or the one-cable standard).
  • The integrated AGC (Automatic Gain Control) provides a constant output level of the Sat-ZF signals and thus for more reserve in the distribution.
CHF 318.00
VAT included
plus
Delivery time: 3-4 days
in stock
Kathrein KEL 1310/O Optical LNB LNB feed size: 40 mm White
Kathrein KEL 1310/O Optical LNB LNB feed size: 40 mm White
  • Unique product on the market: The KEL 1310/O is highlighted as the only optical LNB on the market.
  • Optical peak connection: The system has an optical output through an FC/APC connector and operates at a wavelength of 1310 nm. It supplies an optical output power of type. +4 dBm.
CHF 304.70
VAT included
plus
Delivery time: 3-4 days
in stock
Kathrein EXR 25016 SAT multiswitch Inputs (multiswitches): 5 (4 SAT/1 terrestrial) No. of participants: 16 Standby mode, Quad LNB
Kathrein EXR 25016 SAT multiswitch Inputs (multiswitches): 5 (4 SAT/1 terrestrial) No. of participants: 16 Standby mode, Quad LNB
  • High capacity and versatility: the multi-switch can cascaded and allows the distribution of four satellite levels and terrestrial signals. It has five inputs (1 x terr. And 4 x sat-ZF) and 16 subscriber connections
  • Efficiency through Kathrein-Power-Saving: The Kathrein-Power-Saving function switches off the LNB voltage supply as soon as no receiver is active anymore
CHF 203.50
VAT included
plus
Delivery time: 3-4 days
in stock
Kathrein VWS 04 SAT amplifier
Kathrein VWS 04 SAT amplifier
  • Targeted gain: The amplifier is used primarily to amplify the satellite ZF in the frequency range from 950 to 2150 MHz. The amplification is between 14 and 17 dB and shows an increase in amplification as the frequency increases.
  • Terrestrial Bypass: The device has a passive bypass for the terrestrial range (5 to 862 MHz), which means that this frequency range is passed through unchanged.
CHF 27.45
VAT included
plus
Delivery time: 3-4 days
in stock
Kathrein ZTS 48sw Mast sealing set Suitable for pole Ø (max.): 48 mm Black
Kathrein ZTS 48sw Mast sealing set Suitable for pole Ø (max.): 48 mm Black
  • High stability: Suitable for fixing masts with a permissible bending torque of up to 1650 Nm – for maximum wind load safety.
  • Complete set: Contains all mounting and sealing parts, including mast cover ZTC 08, cover collar, aluminum roof panel, mast bracket, mast bracket and wood screws.
CHF 56.00
VAT included
plus
Delivery time: 3-4 days
in stock
Kathrein EXR 25516 SAT multiswitch Inputs (multiswitches): 5 (4 SAT/1 terrestrial) No. of participants: 16 Standby mode
Kathrein EXR 25516 SAT multiswitch Inputs (multiswitches): 5 (4 SAT/1 terrestrial) No. of participants: 16 Standby mode
  • High capacity and expandability: the multi-switch can cascade. It serves to distribute four satellite levels and terrestrial signals to a total of 16 subscriber connections. Up to six devices can be cascaded for plant expansion.
  • High signal separation: The multi-switch ensures high decoupling between the outputs. The decoupling of the trunk is 40 dB, while the uncoupling achieves horizontal to vertical 25 dB.
CHF 185.00
VAT included
plus
Delivery time: 3-4 days
in stock
Kathrein ZAW 13 21410012 Crimping tools
Kathrein ZAW 13 21410012 Crimping tools
  • Perfect compression mounting: Designed for reliable and firm crimping of compression plugs, ensuring extremely high contact reliability.
  • Optimal fit: specially adapted to the Kathrein compression plugs EMK 12 and EMK 19, WAS guarantees error-free processing.
CHF 93.20
VAT included
plus
Delivery time: 3-4 days
in stock

Take a cookie and let’s go

Language

Deutsch
English
Français

We use cookies and other technologies ("cookies etc.") to provide you with the best experience on our website. If you opt out of tracking, we will only use necessary cookies etc. that are required for the basic functionality of our website.
We have implemented technical and administrative security measures to protect your data against loss, destruction, manipulation and unauthorised access.

Choose according to your preferences :
Functional

This type of cookie etc. allows us to perform anonymous analysis activities to gain a better understanding of how our website is generally used. This allows us to make necessary and functional performance and design improvements to the website.

Marketing

We use cookies etc. from various marketing service providers to enable us to present you with suitable product offers and display third party offers. In addition, we would like to show you only advertisements that you are actually interested in on platforms of selected marketing partners and social networks.

All of the above

By clicking on "Accept", you voluntarily agree to the above data processing.
In addition, you can revoke and adjust consent at any time by accessing our privacy policy.
{{#if results}}
{{results.[0].headline}}
{{/if}}