TINKERFORGE

Logo
Black, twisted cable with white connectors at both ends, coiled in a loose circle.
  • 7-pin plug to 10-pin plug
  • Length 200 cm
2,99 €
VAT included
plus
Delivery time: 2-3 days
while stocks last
E-paper module with black frame shows the red logo and the lettering 'TinkerForge'.
  • 7.4 cm (2.9") E-Paper display with a resolution of 296x128 pixels
  • Two three-color displays are available: Black/White/Red and Black/White/Gray
  • Embedded font for simple text display
25,99 €
VAT included
plus
Delivery time: 2-3 days
while stocks last
Small electronic circuit board with multiple connections and two aluminium capacitors. Labelled 'Power Supply 12V DC'.
  • Supplies a stack of bricks with 5V
  • Can supply motors connected to Bricks (e.g. DC Brick)
  • Input voltage 6V to 27V DC
13,99 €
VAT included
plus
Delivery time: 2-3 days
while stocks last
Circuit board with green connector strip and electronic components, labelled as 'Industrial Analog Out 2.0', brand name 'Tinkerforge'.
  • Simultaneously programmable voltage and current output
  • Outputs electrical current between 0mA and 24mA (IEC 60381-1)
  • Outputs electrical voltage between 0V and 10V (IEC 60381-2)
51,99 €
VAT included
plus
Delivery time: 2-3 days
while stocks last
Electronic sensor board with multiple connectors and components on a black circuit board. Arrows indicate X, Y, Z directions.
  • Fully equipped IMU/AHRS with 9 degrees of freedom (3-axis accelerometer, compass, gyroscope each)
  • No accumulating error, no gimbal lock!
  • Works calibrated, automatic continuous self-calibration during operation
Sold out
A silver weighing cell with attached cable, used for weight measurement in industrial applications.
  • Load cell
  • 0-50kg measuring range
  • 0.02% accuracy
28,99 €
VAT included
Free shipping
Delivery time: 2-3 days
in stock
Black GPS antenna with long cable and gold-plated connector, suitable for improving GPS signal reception.
External GPS Antenna with SMA plug and 300 cm cable. Compatible with the GPS and GPS Bricklet Bricklet 2.0 with U.FL to SM...
Currently not available
There is already a notification for this product.
Small electronic component with a black plastic casing, two sockets, and printed '+' and '-' symbols for power connections.
This is an adapter between a 5mm DC plug and 2 pin black plug. It can be used to supply bricks or power supplies via an ex...
Sold out
A black circuit board with multiple connector slots, the Tinkerforge logo, and labels for electronic components and interfaces.
  • Raspberry Pi IS in the standard HAT form factor
  • Eight connectors for Bricklets
  • Integrated 5.3V power supply (5V-28V input, up to 4A)
109,99 €
VAT included
plus
Delivery time: 2-3 days
in stock
A black, twisted cable with white plugs at both ends, suitable for electrical connections in devices.
  • 7-pin plug to 7-pin plug
  • Cable length: 15 cm
4,99 €
VAT included
plus
Delivery time: 2-3 days
in stock
A NFC 1.0 circuit board from Tinkerforge with a large 'TF' logo on the right and a metal mesh on the left.
  • Reads and writes NFC Forum Type 1, 2, 3, 4 and Mifare Classic Tags.
  • NDEF data records can be read and written directly with API.
  • Supports NFC P2P operating modes
57,99 €
VAT included
plus
Delivery time: 2-3 days
in stock
Blue current sensor with cable and 3.5 mm jack plug, inscription: 'YHDC, 5A/1V, SOT013'.
Foldable current transformer with a measuring range of 0A - 5A (AC) and an output voltage of 0-1V. This current transform...
19,99 €
VAT included
plus
Delivery time: 2-3 days
in stock