TINKERFORGE

Logo
TinkerForge Jumper cable Raspberry Pi®, TinkerForge [12x Wire jumper socket - 12x Wire jumper socket] 30.00 cm Multi-coloured
Ten colourful, parallel jumper cables with connectors at both ends, commonly used for electronic circuit projects.
This set consists of 12 jumper cables (Dupont cables). Each cable is 30 cm long and has female / female connector suitable...
CHF 14.95
VAT included
plus
Delivery time: 3-4 days
in stock
TinkerForge 41 Step-Down Power Supply TinkerForge
Small electronic circuit board with multiple connections and two aluminium capacitors. Labelled 'Power Supply 12V DC'.
  • Supplies a stack of bricks with 5V
  • Can supply motors connected to Bricks (e.g. DC Brick)
  • Input voltage 6V to 27V DC
CHF 22.40
VAT included
plus
Delivery time: 3-4 days
while stocks last
TinkerForge 659 Fastener set Suitable for (single board PCs) TinkerForge 1 pc(s)
An arrangement of various metallic fastening elements, including screws, nuts, washers, and spacers.
  • 4 spacers 9mm M3 (internal/external thread)
  • 4 spacers 10mm M3 (internal/internal thread)
  • 8 screws M3
CHF 7.15
VAT included
plus
Delivery time: 3-4 days
in stock
TinkerForge 34 TinkerForge Suitable for (single board PCs) TinkerForge 1 pc(s)
A small black Raspberry Pi HAT with an Ethernet port and two connectors. Designed for hardware expansion.
  • Communicate directly with Bricks/Bricklet without Brickd
  • Supports 10/100 Mbps Ethernet (1000 Mbps compatible)
  • Integrated PoE power supply (PD Class 0 for IEEE 802.3af)
CHF 34.85
VAT included
plus
Delivery time: 3-4 days
while stocks last
TinkerForge 293 Frequency counter 1 pc(s)
Small, square electronic module with green connection strip and various electronic components on a black background.
  • Frequency counter with 4 galvanically isolated channels
  • Configurable edge counter per channel
  • Measures duty cycle, frequency and condition per channel
CHF 41.60
VAT included
plus
Delivery time: 3-4 days
while stocks last
TinkerForge 6126 Load cell Suitable for (single board PCs) TinkerForge 1 pc(s)
A single-axis load cell sensor with a capacity of 5 kg and RoHS marking, with cable connections.
  • Micro load cell
  • 0-5kg measuring range
  • 0.05% accuracy
CHF 18.00
VAT included
plus
Delivery time: 3-4 days
in stock
TinkerForge 2116 Expansion board Suitable for (single board PCs) TinkerForge 1 pc(s)
Circuit board with green connector strip and electronic components, labelled as 'Industrial Analog Out 2.0', brand name 'Tinkerforge'.
  • Simultaneously programmable voltage and current output
  • Outputs electrical current between 0mA and 24mA (IEC 60381-1)
  • Outputs electrical voltage between 0V and 10V (IEC 60381-2)
CHF 41.60
VAT included
plus
Delivery time: 3-4 days
while stocks last
TinkerForge Bricklet cable TinkerForge [1x Bricklet connector (10-pin) - 1x Bricklet connector (10-pin)] 15.00 cm Black
Schwarzes Verbindungskabel mit zwei weißen Steckern an den Enden, symmetrisch angeordnet, zeigt die Verbindung zwischen zwei Geräten.
  • Bricklet cable 15 cm (10 P-10 p)
CHF 2.70
VAT included
plus
Delivery time: 3-4 days
while stocks last
TinkerForge 6152 Bricklet TinkerForge
Black, twisted cable with white plugs at both ends.
  • 7-pin plug to 7-pin plug
  • Length 100 cm
CHF 7.60
VAT included
plus
Delivery time: 3-4 days
in stock
TinkerForge 2105 Power/voltage/amp meter Suitable for (single board PCs) TinkerForge 1 pc(s)
Current and Voltage Sensor Module with cable connections, black printed circuit board. Measures current up to 20A and voltage up to 36V.
  • Measures power, voltage and current up to 720W/36V/20A
  • Resolution 1mW, 1mV, 1mA over complete measuring range
  • BI-directional current measurement (e.g. charging/discharging)
CHF 40.95
VAT included
plus
Delivery time: 3-4 days
in stock
TinkerForge 761 Enclosure Suitable for (single board PCs) TinkerForge 1 pc(s)
A transparent, rectangular plastic box on a green stand. It has ventilated sides, suitable for storage or experiments.
The top hat rail casing can be used to fasten Tinkerforge Bricks and Bricklets comfortably on top hat rails. A total of 8...
CHF 40.50
VAT included
plus
Delivery time: 3-4 days
while stocks last
TinkerForge 660 Fastener set Suitable for (single board PCs) TinkerForge 1 pc(s)
A set of silver nuts, hexagonal-headed bolts and washers, arranged in various sizes.
  • 4 spacers 12mm M3 (internal/external thread)
  • 4 spacers 10mm M3 (internal/internal thread)
  • 8 screws M3
CHF 5.00
VAT included
plus
Delivery time: 3-4 days
in stock

Take a cookie and let’s go

Language

Deutsch
English
Français

We use cookies and other technologies ("cookies etc.") to provide you with the best experience on our website. If you opt out of tracking, we will only use necessary cookies etc. that are required for the basic functionality of our website.
We have implemented technical and administrative security measures to protect your data against loss, destruction, manipulation and unauthorised access.

Choose according to your preferences :
Functional

This type of cookie etc. allows us to perform anonymous analysis activities to gain a better understanding of how our website is generally used. This allows us to make necessary and functional performance and design improvements to the website.

Marketing

We use cookies etc. from various marketing service providers to enable us to present you with suitable product offers and display third party offers. In addition, we would like to show you only advertisements that you are actually interested in on platforms of selected marketing partners and social networks.

All of the above

By clicking on "Accept", you voluntarily agree to the above data processing.
In addition, you can revoke and adjust consent at any time by accessing our privacy policy.