KWB

kwb 492870 Delta grinder blade set Grit size 60, 120, 180 (Ø) 93 mm 20 pc(s)

ideal for Delta grinders, Multi grinders, Triangle grinders and work in raw and round construction.;The grinding blade is ideal for grinding metal, wood, paint, paint, paint, filler, Stone and plastic.;The emery paper coated with aluminum oxide and Stearat (fully resin-bound) with Velours-rear side is particularly resistant and simplifies the work in the daily workshop use.;High-quality plate grinder with Velcro-adhesion system enables a quick and tool-free change.;The following grinding sheets for work in the hobby and hobby area are included: 8x K-60, 6x K-120, 6x-grinding discs. (Part Number: 492870)

5,99 €

VAT included

plus

Delivery time: 1-2 days

in stock

kwb 499176 Hole saw set 6-piece 68 mm, 82 mm 6 pc(s)

Hollow drill bit set 6-part., hollow drill bit hard-metal equipped, impact-resistant, special hardened, special soldered h...

42,70 €

VAT included

plus

Delivery time: 1-2 days

in stock

kwb 586157 Carbide metal circular saw blade 184 x 16 mm 1 pc(s)

Saw blade with a blade diameter of 184 mm, drill diameter of 16 mm, stem blade thickness 1, 4 mm and a cut width of 2, 4 mm.;The chipboard saw blade is characterized by a medium number of teeth: So-called normal teeth specially for working on a carpenter and carpenter level.;The blades fit on hand circular saws, As well as chop and feed saws of all commercially available brands.;Because the carbide teeth are soldered to the blade alternately, the cut is faster because the chip removal is better guaranteed.;The blades produce particularly clean cutting edges, e.g. in coated chipboard, kitchen worktops, carpenter plates, chip plates, hard fiber boards + MDF and HDF plates, as well as in glass fiber reinforced plastics (KWB Art. No.: 586157).

14,08 €

VAT included

plus

Delivery time: 1-2 days

in stock

Schraubzwinge 50x200 Mm

3,63 €

VAT included

plus

Delivery time: 1-2 days

in stock

kwb 542842 Delta grinder blade set Grit size 120 Width across corners 93 mm 1 pc(s)

ideal for Delta grinders (e.g. Einhell TC-DS 19), Multi grinders, Sling Grinders Triangle Grinders and Dry-construction Grinders. For working in raw and block construction.;The grinding blade is particularly suitable for corner grinders and for grinding metal, wood, paint, paint, scraper mass, Stone and plastic.;The emery paper coated with aluminum oxide (fully resin-bound) with reinforced carrier material and velours-back is particularly resistant and simplifies the work in the daily workshop use.;high-quality grinding paper with Velcro-adhesion system enables an easy, quick and tool-free change.;the following grinding sheets for work in the professional and hobby area are included: 20x K-120 (grain size) grinding discs. (Part Number: 542842)

7,25 €

VAT included

plus

Delivery time: 1-2 days

in stock

kwb 491308 Random orbit sander sandpaper Grit size 80 (Ø) 125 mm 5 pc(s)

The sanding paper is suitable for eccentric grinding and grinding machines, dimensions of the paper: Diameter 125 mm, grit 80;the grinding sheet is ideal for smoothing out filler paste and irregularities as well as for removing paint, rust, synthetic resin paint, And acrylic paint.;The fiberglass emery paper (resin-bonded), which is coated with silicon carbide grain, is particularly resistant and facilitates the work in daily workshop use.;High-quality grating sandpaper with a high service life enables ergonomic and fatigue-free working. The great advantage of the sanding sheet is that it does not get too fast as conventional sandpaper and is easy to clean.;Can be used in professional and hobby areas for painting, spatula work or for body building and painting.

4,00 €

VAT included

plus

Delivery time: 1-2 days

in stock

kwb 588257 Carbide metal circular saw blade 216 x 30 mm 1 pc(s)

Saw blade with a blade diameter of 216 mm, drill diameter of mm, stem blade thickness 1, 6 mm and a cut width of 2, 4 mm.;The chipboard saw blade is characterized by a medium number of teeth: So-called normal teeth especially for work on carpenter and carpenter level.;The blades fit on hand circular saws, As well as chop and feed saws of all commercially available brands.;Because the carbide teeth are soldered to the blade alternately, the cut is faster because the chip removal is better guaranteed.;The blades produce particularly clean cutting edges, e.g. in coated chipboard, kitchen worktops, carpenter plates, chip plates, hard fiber boards + MDF and HDF plates, as well as in glass fiber reinforced plastics (KWB Art. No.: 588257).

12,32 €

VAT included

plus

Delivery time: 1-2 days

in stock

kwb 063495 Tape measure 50 m Fibreglass

A black tape measure with a handle and red rotating grip, with the tape extended showing centimetre and metre measurements.

Glass fiber measuring tapeBoth sides printed with metric and inch dimensionsReturn crank transmission 1:3 thus saves time and quick rolling up of the belt

20,99 €

VAT included

plus

Delivery time: 1-2 days

in stock

kwb 053714 Handheld stapler Staple type Type 53F Staple length 4 - 14 mm