KWB

kwb 022990 Spare snap-off blades, 9 mm 10 pc(s)

(1)

kwb 022990 Spare snap-off blades, 9 mm 10 pc(s)

In a plastic box, razor-sharp spare blades, long life, very sharp cut, 12 breakable blade segments and 13 blade tips

Delivery time: 3-4 days

kwb 584157 Carbide metal circular saw blade 156 x 12.75 mm 1 pc(s)

KWB circular saw blade with markings '156 x 2.4 x 12.75 mm'. Suitable for wood and metals, HM TCT material.

Saw blade with a blade diameter of 156 mm, drill diameter of 12, 7 mm, log blade thickness 1, 4 mm and a cut width of 2, 4 mm.;The chipboard saw blade is characterized by a medium number of teeth: So-called normal teeth especially for working on a carpenter and carpenter level.;The blades fit on hand circular saws, As well as chop and feed saws of all commercially available brands.;Because the carbide teeth are soldered to the blade alternately, the cut is faster because the chip removal is better guaranteed.;The blades produce particularly clean cutting edges, e.g. in coated chipboard, kitchen worktops, carpenter plates, chip plates, hard fiber boards + MDF and HDF plates, as well as in glass fiber reinforced plastics (KWB Art. No.: 584157).

Delivery time: 3-4 days

2 Sä-Sägebl.Bimetall G 152mmsb

2 Sä-Sägebl.Bimetall G 152mmsb

Delivery time: 3-4 days

kwb 939390 Carpenter's pencil, 3 piece Carpenter pencil

kwb 939390 Carpenter's pencil, 3 piece Carpenter pencil

HB refill, non-tipped, oval, redWrites on many surfaces, such as wood, concrete, brick, stone, plasterboardIdeal for crafts, construction sites, household and hobbies

Delivery time: 3-4 days

kwb 450813 Ball-peen hammer 300 g 1 pc(s)

A hammer with a wooden handle, which is partially painted red. The hammer head is made of metal and has a narrow point.

TÜV GS tested, according to DIN 1041, railway and fin polished, Hickory wood handle

Delivery time: 3-4 days

kwb 032120 Knothole fillers 20 mm 40 pc(s)

Grooved wooden dowels with ridged cross-section.

For improvement of wood faults and tree branch holesAs a cover pin for the screw head coverTo improve fire resistance behavior in wood and wood glue construction

Delivery time: 3-4 days

kwb 247190 Chisel set 3-piece Total length 250 mm SDS-Plus 1 Set

Three metal chisels with different tips: flat, pointed, and wide. Each has a cylindrical handle for use with a power tool.

SDS chisel set 3-piece, short chisel set for the hammer drill with the most common sizes, length of all chisel: 140 mm, co...

Delivery time: 3-4 days

kwb 724540 Diamond cutting disc 125 mm 1 pc(s) Concrete, Granite, Marble, Ceramic, Tiles, Ceramics, Natural stone, Cast stone

Round cutting disc with the inscription 'AGGRESSO-FLEX Special' and 'Energy Saving'. 125 mm diameter, suitable for tile cutting.

DIAMOND thin cutting discs, extra thin cutting edge, thickness 7.0 mm, for high cutting performance with professional cont...

Delivery time: 3-4 days

kwb 159120 HSS Metal twist drill bit 12 mm Total length 151 mm DIN 338 Cylinder shank 1 pc(s)

A dark grey spiral drill bit with a sharp point and curved flutes, suitable for drilling into metal or wood.

KWB spiral drill set for metal; with reduced shaft for commercial drills; drill chuck with min. or max. 10mm span required; according to DIN 338, steam-started with 118° tip angle and rolled; for example, alloyed and unalloyed steel, cast iron, non-ferrous metals, hard plastics

Delivery time: 3-4 days

kwb 912515 Sandpaper belt set Grit size 150 (L x W) 533 mm x 75 mm 3 pc(s)

A red ribbon with a lighter line running through its centre.

150 grit, fineMedium fine grindingelastic

Delivery time: 3-4 days

kwb 792250 Cutting disc (straight) 125 mm Stone

Grinding disc with the inscription 'CUT-FIX 125 x 3.0 x 22.23 mm', max. 80 m/s, complies with EN 12413, C 24 R-BF, suitable for metalworking.

Binding BF, grain aluminum oxideFor professional permanent useFor angle grinders with circumferential speed of 80 m/s.

Delivery time: 3-4 days

5 Haushaltsschaberklingen

5 Haushaltsschaberklingen

Delivery time: 3-4 days