BRENNENSTUHL

- Power= 10 W
- Total luminous flux= 1150 lm
Setup notification
Notification should be active for:
Send notification by e-mail to:
- 40 m cable length (H07RN-F 3G1.5) RN cable - certified for difficult construction conditions according to VDE 0100 Part 704; Outdoor cable reel with overheating protection, control light in case of overheating and overload; Drum body made of highly fracture-resistant special plastic on particularly sturdy support frame;3 safety sockets, splash-proof, with self-closing lids - for use on site according to DGUV 203-006 (formerly) BGI 608) and constant outdoor application; cable drum with stable folding handle for a comfortable rolling up
Setup notification
Notification should be active for:
Send notification by e-mail to:
- Safety switch illuminated, two-pole can be switched on/off
- Earthing contact socket outlets in 45° arrangement, also for angled plugs
- With mounting eyelets for wall mounting
Setup notification
Notification should be active for:
Send notification by e-mail to:
- Foreign bodies - and splash-proof
- Front glass made of safety glass
- Tilting
- The Mode 3 charging cable according to IEC 61851-1 is a standardized charging cable with type 2 plug and coupling according to IEC 62196-2 for charging electric vehicles and plug-in hybrids for a public charging station or home with a Wallbox
- The EV charging cable type 2 on type 2 with 7m cable allows three-phase charging with a maximum charging power of 11 kW
- The cable is protected with the protection class IP55 against dust and jet-water - in addition, the protective caps of the plug prevent contamination
Setup notification
Notification should be active for:
Send notification by e-mail to:
- 4-pack setTested according to DIN EN 14604Penetrating alarm signal 85 dBQuality Seal "Q" - Smoke detector meets the increased requirements of vfdb Directive 14-01Visual display of the function, with test button for functional testingVisual and audio signal with low battery statusIncluding mute function in case of false alarm and "not interference function" in low battery statusVisual display of the function, with test button for functional testing
- The portable EV charger type 2 on CEE offers a range of 8 m flexibility at the charging location and a maximum charging power of 11 kW for quick charging - plug & play design for convenient charging without installation
- For an efficient charging procedure, the maximum charging current can be changed between 8, 10, 13 and 16A - in addition the timer function enables a delay of the charging start over the selected period (1,2,4,6,8 or 10 hours).
- The-phase 3-16A-charger mode 2 according to IEC 61851-1 with ICCB for electric vehicles is manufactured strictly according to the standard IEC 62752 and is protected against over/under voltage, overload, fault current and excess temperature
Setup notification
Notification should be active for:
Send notification by e-mail to:
- Cable 20 m H05VV-F3G1.5 red
- 3fach self-closing lid on the sockets
- With over heating protection
Setup notification
Notification should be active for:
Send notification by e-mail to:
- 6-way socket stripWith overvoltage protection 60,000 A.3 m cable, with switchEarthing contact sockets arranged at a 45° angle