network quality analysis: IEC61000-4-30 Class A;DIN EN 50160;DIN EN 61000-4-7;DIN EN 61000-4-15;Measurement of all important network parameters: V, A, P, Q, D, S, f, E, cosϕ, PF, tgϕ, THD, TID, K-factor, PST, PLT;Ripple control signals up to 3 kHz;Digital recording of waveforms;Measurement in networks of 64V-760V with 40Hz-70Hz;Data transmission via GSM (GPRS);Integrated GPS receiver for RTC synchronization;Theft protection by SMS warning;Working temperature: -20...55°C
Sonel's PQM-702 Power Quality Analyzer is designed to analyze power quality at the highest level. All common EU and IEC standards are fulfilled and all measurements are carried out according to IEC 61000-4-30 class A. Current clamps allow currents up to 3 kA to be measured and, together with all other parameters recorded by the analyzer, transferred to the PC via WLAN, integrated modem (UTMS or GSM), USB or microSD card with the enclosed software, professionally evaluated and analyzed. Protocols can be generated automatically according to EN50160. The exact network analysis is additionally supported by the integrated GPS receiver for time synchronization of the RTC. Installation is possible both in buildings and in the open field.
7 test leads, (2.2m fixed);4 magnetic voltage adapters (L1,L2,L3,N);5 voltage adapters with thread M4/M6 (L1,L2,L3,N,PE);1 AC adapter for cable distribution;mains plug with banana sockets;crocodile clips: 2 red, 1 yellow, 1 blue, 1 black;2 rail mountings;2 mast mounts;2 tension straps;Set rechargeable LiIon batteries;1 hard case;1 OR-1 - USB adapter for data transfer;1 USB cable; software Sonel Analysis for data analysis;instruction manual;calibration certificate
05907624021211, 5907624021211, Sonel, WMDEPQM710, PQM-710, power grid diagostics
