TinkerForge 41 Step-Down Power Supply Expansion board TinkerForge

  • price alarm

    An error has occurred.
    Please enter a valid email address
    Price alarm is activated! We will send you an e-mail as soon as your desired price has been reached.
35,99 €
VAT included
plus
in stock
Delivery time: 1-2 days
TinkerForge 41 Step-Down Power Supply Expansion board TinkerForge
35,99 €
VAT included
plus
One article is not enough for you and you want to save money?
from 3 piece: 35,63 € 1,0% savings
from 5 piece: 35,27 € 2,0% savings
from 10 piece: 34,55 € 4,0% savings
  • Product description

    Overview

    Supplies a stack of bricks with 5V
    Can supply motors connected to Bricks (e.g. DC Brick)
    Input voltage 6V to 27V DC
    Additional output voltage 5V (since hardware version 1.1)

    Description

    The Step-Down Power Supply can be used to power a stack of bricks and Bricklets. It is equipped with an efficient step-down regulator and is placed under a stack. From there it provides the 5V needed by Bricks and Bricklets. In addition, it feeds the external supply voltage into the stack power supply. It is not absolutely necessary to operate individual bricks, but is intended for use in stacks.

    There are several use cases. The Step-Down Power Supply enables to supply stacks via batteries. Such stacks can then communicate via wired or wireless master extensions. The step-down power supply can also be used to supply DC motors, servos or stepper motors via the stack (via the stack power supply with up to 27V DC) without having to connect another external voltage source to the corresponding motor driver Brick. If the power consumption of large stacks exceeds the 500mA, which a normal USB port can supply, the Step-Down Power Supply can jump in here and take over the power supply of the stack.

    The allows input voltage range from 6V to 27V DC. A Master Brick can measure the power consumption and voltage of the external power supply. Currents below 200mA cannot be measured satisfactorily.

    Since hardware version 1.3, the Step-Down Power Supply has reverse polarity protection on both plugs and is also protected against accidental replacement of the plugs.

    Characteristics

    Power consumption: 20-30mA, depending on the input voltage
    minimum/maximum input voltage: 6V/27V DC
    maximum output current: 5V Supply: 3A; Pass-through for motor driver Bricks: 5A
    Hardware Version: 1.3

    Keywords

    04251640700188, TinkerForge, 41, Step-Down Power Supply

    TinkerForge 41 Step-Down Power Supply Expansion board TinkerForge
    TinkerForge 41 Step-Down Power Supply Expansion board TinkerForge
    TinkerForge 41 Step-Down Power Supply Expansion board TinkerForge
    TinkerForge 41 Step-Down Power Supply Expansion board TinkerForge
  • Product specifications

  • Downloads

  • Reviews

How to shop with us?

Receive benefits now!

Benefit from 2 years free follow-up warranty! Simply register for our free newsletter!

{{#if results}}
{{/if}}