MEAN WELL

Mean Well HRPG-300-24 AC/DC PSU module (+ enclosure) 14 A 336 W 24 V DC 1 pc(s)

(1)

Mean Well HRPG-300-24 AC/DC PSU module (+ enclosure) 14 A 336 W 24 V DC 1 pc(s)

No. of outputs: 1 x
Output 1: /
24 V DC (max.) / 14 A (max.)

Currently not available

MW Mean Well RS-50-5 SMPSU 5 V DC 10 A 50 W

(11)

Metallic power supply with multiple screw terminals, labelled with '+V', '-V' and 'COM'. Primarily used for electronic devices.

Output 5 V DC / 10 A
Power 50 W
Screw terminal

Delivery time: 2-3 days

MEAN WELL LPV-150-12 SMPSU 12 V DC 10 A 120 W

(1)

Output 12 V DC / 10 A
Power 120 W
Open end cable

Delivery time: 2-3 days

MEAN WELL APC-35-700 LED driver Constant current 35 W 0.7 A 15 - 50 V DC not dimmable, Surge protection 1 pc(s)

(4)

MEAN WELL APC-35-700 LED driver Constant current 35 W 0.7 A 15 - 50 V DC not dimmable, Surge protection 1 pc(s)

Constant current
15 - 50 V DC
0.7 A

Delivery time: 2-3 days

MEAN WELL DRP-02 DIN mount Compatible with MW Mean Well

(1)

DIN-rails retaining clip with screw fastening for universal use.

This offer is only valid for business customers

MEAN WELL APC-35-1050 LED driver Constant current 34.7 W 1.05 A 11 - 33 V DC not dimmable, Surge protection 1 pc(s)

(4)

MEAN WELL APC-35-1050 LED driver Constant current 34.7 W 1.05 A 11 - 33 V DC not dimmable, Surge protection 1 pc(s)

Constant current
11 - 33 V DC
1.05 A

Delivery time: 2-3 days

MEAN WELL APC-12-350 LED driver Constant current 12 W 0.35 A 9 - 36 V DC not dimmable, Surge protection 1 pc(s)

(4)

A white electric power supply with the inscription 'Mean Well APC-12-700'. It has cables at both ends and several technical symbols.

Constant current
9 - 36 V DC
0.35 A

Delivery time: 2-3 days

MEAN WELL DDR-30L-5 Rail mounted DC/DC converter (DIN) 5 V DC 6 A 30 W No. of outputs:1 x Content 1 pc(s)

(2)

Industrial power supply with black enclosure, mounted on a DIN rail. Input: 18-75VDC, Output: 24V, 1.25A. Markings on top.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Width of only 35 mm · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) · Cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 2-3 days

MEAN WELL XLG-100-12-A LED driver Constant voltage, Constant current 96 W 4 - 8 A 12 V DC PFC circuit, Outdoor, adjustable, Surge

(2)

MEAN WELL XLG-100-12-A LED driver Constant voltage, Constant current 96 W 4 - 8 A 12 V DC PFC circuit, Outdoor, adjustable, Surge

IP67 · Current limit adjustable via internal potentiometer · Independent operating device · Universal input 100...305 V AC · Metal housing · Overload protection through current limitation, auto recovery · Protected against short-circuit, over-current, over-voltage, over-temperature · Built-in PFC circuit · Low idle power less than 0.5W · For LED lighting applications · SELV compliant · Safety Standards: EN 61347-1, EN 61347-2-13, EN 62384, and more · Emc Standards: EN55015, EN61000-3-2 Class C, EN 61000-3-3, EN61547 and other · Surge immunity level 6 kV

Delivery time: 2-3 days

MW Mean Well HLG-240H-30A LED driver, LED transformer Constant voltage, Constant current 240 W 8 A 30 V DC PFC circuit, Surge

(13)

A silver power supply with the inscription 'HLG-240H-15A' by MEAN WELL, displaying technical specifications and IP65 protection class.

Output 30 V DC/8 A
Constant voltage, Constant current
240 W Power

Delivery time: 2-3 days

MEAN WELL ICL-16L MEANWELL inrush current limiter series: ICL-16R/L for inductive and capacitive loads Grey, Blue Protection

MEAN WELL ICL-16L MEANWELL inrush current limiter series: ICL-16R/L for inductive and capacitive loads Grey, Blue Protection

Peak/RMS current limitation · Allows installation of several switched-mode power supplies on one AC line · For inductive and capacitive loads · 180-264 Vac/16A permanently · Internal thermal fuse · Integrated bypass relay · Capacitive loads up to 2500 µF · For installation in the terminal

Delivery time: 2-3 days

MEAN WELL NDR-480-48 Rail mounted PSU (DIN) 10 A 480 W No. of outputs:1 x Content 1 pc(s)

(4)

Industrial power supply mounted on DIN rail. Label shows 'Mean Well NDR-480-24', input: 100-240VAC, output: 24V 20A.

This switched-mode power supply can be mounted directly on the DIN rail in closed design with touch-protected screw termin...

Delivery time: 2-3 days