MEAN WELL

MEAN WELL PCD-60-2400B LED driver Constant current 60 W 2.4 A 15 - 25 V DC dimmable, PFC circuit, Surge protection, Suitable for

(3)

MEAN WELL PCD-60-2400B LED driver Constant current 60 W 2.4 A 15 - 25 V DC dimmable, PFC circuit, Surge protection, Suitable for

Constant current
15 - 25 V DC
2.4 A

Delivery time: 2-3 days

MEAN WELL PWM-60-24KN LED driver Constant voltage 60 W 2.50 A 24 V DC dimmable, Suitable for flammable surfaces, Approved for use

A black Mean Well LED power supply (Model PWM-90-36) with technical specifications and certifications on the top surface.

Constant voltage
24 V DC
2.50 A

This offer is only valid for business customers

MEAN WELL LCM-40KN LED driver Constant current 42 W 350 - 1050 mA 2 - 100 V DC dimmable 1 pc(s)

MEAN WELL LCM-40KN LED driver Constant current 42 W 350 - 1050 mA 2 - 100 V DC dimmable 1 pc(s)

Independent operating device · Plastic housing · Constant current can be selected via DIP switch · KNX interface · Integrated KNX push button · Overload protection through current limitation, auto recovery · Protected against short-circuit, overheating, over-voltage · Built-in PFC circuit · For LED lighting applications · Safety Standards: EN 61347-1, EN 61347-2-13 and other · Emc Standards: EN 61000-3-2, Class C, EN55015, EN61547 and other · SELV compliant · KNX and push dimming, standby power consumption less than 0.5W

Delivery time: 2-3 days

MEAN WELL XLG-25-AB LED driver Constant power 25 W 250 mA - 1.05 A 22 - 54 V DC PFC circuit, adjustable, dimmable, 3-in-1 dimmer

(3)

MEAN WELL XLG-25-AB LED driver Constant power 25 W 250 mA - 1.05 A 22 - 54 V DC PFC circuit, adjustable, dimmable, 3-in-1 dimmer

Constant power · Independent operating device · Wide-range input · Metal housing · Overload protection through current limitation, auto recovery · Protected against short circuit, overload, overvoltage, overheating · Built-in PFC circuit · Low idle power · Suitable for LED lighting applications · SELV compliant · Surge immunity level 6 kV · IP67, current limit can be set via internal potentiometer, dimming via running control cable, 3 in 1 dimming function (0...10 V DC, 10 V PWM, potentiometer)

Delivery time: 2-3 days

MEAN WELL TDR-240-24 Rail mounted PSU (DIN) 24 V DC 10 A 240 W No. of outputs:1 x Content 1 pc(s)

MEAN WELL TDR-240-24 Rail mounted PSU (DIN) 24 V DC 10 A 240 W No. of outputs:1 x Content 1 pc(s)

Directly on the DIN-rail mountable · Closed design, touch-proof screw terminals · Input voltage 340 ... 550 V AC (2-phase operation possible) · Overload protection through current limitation, switch-off after 3 s · Protected against short circuit, overload, overvoltage, overheating

Delivery time: 2-3 days

MEAN WELL DDR-30G-24 Rail mounted DC/DC converter (DIN) 24 V DC 1.25 A 30 W No. of outputs:1 x Content 1 pc(s)

(2)

Black electrical device for DIN rail mounting with technical details and connections, voltage-controlled, Model DDR-30L-24.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Width of only 35 mm · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) · Cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 2-3 days

available from 23/09/2026

MW Mean Well RS-15-5 SMPSU 5 V DC 3 A 15 W

(11)

Compact power supply unit with a perforated metal casing and black connection terminals, suitable for electronic devices and applications.

Output 5 V DC / 3 A
Power 15 W
Screw terminal

Delivery time: 2-3 days

MEAN WELL XLG-150-24-A LED driver Constant voltage, Constant current 150 W 3.2 - 6.25 A 24 V DC Approved for use on furniture

A rectangular power supply unit with the labels 'INPUT' and 'OUTPUT', connected with a cable on each side.

IP67 · Current limit adjustable via internal potentiometer · Independent operating device · Universal input 100...305 V AC · Metal housing · Overload protection through current limitation, auto recovery · Protected against short-circuit, over-current, over-voltage, over-temperature · Built-in PFC circuit · Low idle power less than 0.5W · For LED lighting applications · Safety Standards: EN 61347-1, EN 61347-2-13, EN 62384, and more · Emc Standards: EN55015, EN61000-3-2 Class C, EN 61000-3-3, EN61547 and other · Surge immunity level 6 kV

Delivery time: 2-3 days

MW Mean Well MDR-20-5 Rail mounted PSU (DIN) 5 V DC 3 A 15 W No. of outputs:1 x Content 1 pc(s)

(7)

A blue and white DIN rail power supply unit, suitable for voltages of 100-240VAC, with DC voltage indicators.

Direct assembly on DIN Rail · Enclosed case, Touch-guard screw terminals · Universal input · Overload protection, current ...

This offer is only valid for business customers

MEAN WELL ICL-16R MEANWELL inrush current limiter series: ICL-16R/L for inductive and capacitive loads Grey Protection class II

DIN rail mounted separation filter ICL-16R, with input and output voltage marking 180-264VAC, current 16A.

Peak/RMS current limitation · Allows installation of several switched-mode power supplies on one AC line · For inductive and capacitive loads · 180-264 Vac/16A permanently · Internal thermal fuse · Integrated bypass relay · Capacitive loads up to 2500 µF · For DIN-rail mounting

Delivery time: 2-3 days

MEAN WELL HLG-60H-24A LED driver, LED transformer Constant voltage, Constant current 60 W 2.5 A 24 V DC PFC circuit, Surge

(13)

MEAN WELL HLG-60H-24A LED driver, LED transformer Constant voltage, Constant current 60 W 2.5 A 24 V DC PFC circuit, Surge

Output 24 V DC/2.5 A
Constant voltage, Constant current
60 W Power

Delivery time: 2-3 days

MW Mean Well LCM-25DA LED driver Constant current 25 W 0.35 - 1.05 A 6 - 54 V DC dimmable, PFC circuit, Surge protection 1 pc(s)

(3)

MW Mean Well LCM-25DA LED driver Constant current 25 W 0.35 - 1.05 A 6 - 54 V DC dimmable, PFC circuit, Surge protection 1 pc(s)

Constant current
6 - 54 V DC
0.35 - 1.05 A

Delivery time: 2-3 days