MEAN WELL

MEAN WELL DDR-60G-12 Rail mounted DC/DC converter (DIN) 12 V DC 5 A 60 W No. of outputs:1 x Content 1 pc(s)

(2)

A black DIN rail power supply with model number DDR-60L-24. It has input and output specifications on the front panel.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Only 52.5 mm width · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 3-4 days

MEAN WELL APC-16-350 LED driver Constant current 16 W 0.35 A 12 - 48 V DC not dimmable, Surge protection 1 pc(s)

(4)

MEAN WELL APC-16-350 LED driver Constant current 16 W 0.35 A 12 - 48 V DC not dimmable, Surge protection 1 pc(s)

Constant current
12 - 48 V DC
0.35 A

Delivery time: 3-4 days

MEAN WELL DDR-30L-12 Rail mounted DC/DC converter (DIN) 12 V DC 2.5 A 30 W No. of outputs:1 x Content 1 pc(s)

(2)

DIN Rail Switched Mode Power Supply with Black Enclosure, Model Number 'DDR-30L-24', Input 18-75VDC, Output 24V/1.25A.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Width of only 35 mm · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) · Cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 3-4 days

MW Mean Well HLG-80H-12A LED driver, LED transformer Constant voltage, Constant current 60 W 5 A 12 V DC PFC circuit, Surge

(13)

MW Mean Well HLG-80H-12A LED driver, LED transformer Constant voltage, Constant current 60 W 5 A 12 V DC PFC circuit, Surge

Output 12 V DC/5 A
Constant voltage, Constant current
60 W Power

Delivery time: 3-4 days

Mean Well MPS-45-24 AC/DC PSU module (open frame)

Mean Well MPS-45-24 AC/DC PSU module (open frame)

Open frame · Contact pin for nylon-crimp terminals · Universal input · Overload protection, pulsing hiccup shutdown, auto ...

Currently not available

MW Mean Well PLN-100-24 LED driver, LED transformer Constant voltage, Constant current 96 W 4 A 18 - 24 V DC PFC circuit, Surge

(3)

MW Mean Well PLN-100-24 LED driver, LED transformer Constant voltage, Constant current 96 W 4 A 18 - 24 V DC PFC circuit, Surge

Output / power
built-in PFC circuit
dimmable

Delivery time: 3-4 days

MEAN WELL DDR-15G-12 Rail mounted DC/DC converter (DIN) 12 V DC 1.25 A 15 W No. of outputs:1 x Content 1 pc(s)

(2)

Switched-mode power supply mounted on DIN rail, Model DDR-15L-24, Input 16-36 VDC, Output 24V 0.63A.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Very narrow: width only 17.5 mm · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) · Cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 3-4 days

MEAN WELL XLG-200-12-A LED driver Constant voltage, Constant current 192 W 8 - 16 A 12 V DC Approved for use on furniture

MEAN WELL XLG-200-12-A LED driver Constant voltage, Constant current 192 W 8 - 16 A 12 V DC Approved for use on furniture

IP67 · Current limit adjustable via internal potentiometer · Independent operating device · Universal input 100...305 V AC · Metal housing · Overload protection through current limitation, auto recovery · Protected against short-circuit, over-current, over-voltage, over-temperature · Built-in PFC circuit · Low idle power less than 0.5W · For LED lighting applications · Safety Standards: EN 61347-1, EN 61347-2-13, EN 62384, and more · Emc Standards: EN55015, EN61000-3-2 Class C, EN 61000-3-3, EN61547 and other · Surge immunity level 6 kV

Delivery time: 3-4 days

MEAN WELL MDR-40-12 Rail mounted PSU (DIN) 12 V DC 3.33 A 40 W No. of outputs:1 x Content 1 pc(s)

(7)

A blue and white switched mode power supply, model MDR-40-12, DIN rail mounted. Input voltage: 100-240V AC, output: 12V DC, 3.33A.

Direct assembly on DIN Rail · Enclosed case, Touch-guard screw terminals · Universal input · Overload protection, current ...

Delivery time: 3-4 days

MW Mean Well RSP-200-12 SMPSU 12 V DC 16.7 A 200 W

(5)

Metal-cased power supply unit with ventilation holes, suitable for powering electronic devices, Model RSP-200.

Output 12 V DC / 16.7 A
Power 200 W
Screw terminal

Delivery time: 3-4 days

MEAN WELL DDR-15L-5 Rail mounted DC/DC converter (DIN) 5 V DC 3 A 15 W No. of outputs:1 x Content 1 pc(s)

(2)

A power supply unit mounted on a DIN rail, with technical specifications on the front. It shows input and output voltages.

For DIN rail mounting. · Can be used on DIN-rail TS-35/7.5 or 15 can be installed · Very narrow: width only 17.5 mm · Wide input voltage range 4:1 · No minimum load required · Regulated output voltage (±10%) · Cooling by free air convection · Input/output insulation 4000 V · Protection: short circuit, overload, over voltage, input polarity, input under voltage protection

Delivery time: 3-4 days

MEAN WELL LPV-60-12 LED transformer Constant voltage 60 W 0 - 5 A 12 V DC not dimmable, Surge protection 1 pc(s)

(4)

A rectangular white power supply with the model designation 'LPV-60-36' by Mean Well. Suitable for LED applications, IP67 certified.

Output12 V DC / 0 - 5 A
Constant voltage
60 W Power

Delivery time: 3-4 days