![Telegärtner RJ45 Networks Y adapter CAT 5e [2x RJ45 socket - 1x RJ45 plug] 15.00 cm White](https://asset.re-in.de/isa/160267/c1/-/en/409975_BB_00_FB/Telegaertner-RJ45-Networks-Y-adapter-CAT-5e-2x-RJ45-socket-1x-RJ45-plug-15.00-cm-White.webp?x=600&y=600&ex=600&ey=600&align=center&format=WEBP&quality=95 "Telegärtner RJ45 Networks Y adapter CAT 5e [2x RJ45 socket - 1x RJ45 plug] 15.00 cm White")
![Telegärtner RJ45 Networks Y adapter CAT 5e [2x RJ45 socket - 1x RJ45 plug] 15.00 cm White](https://asset.re-in.de/isa/160267/c1/-/en/409975_BB_00_FB/Telegaertner-RJ45-Networks-Y-adapter-CAT-5e-2x-RJ45-socket-1x-RJ45-plug-15.00-cm-White.webp?x=75&y=75&ex=75&ey=75&align=center&format=WEBP&quality=95 "Telegärtner RJ45 Networks Y adapter CAT 5e [2x RJ45 socket - 1x RJ45 plug] 15.00 cm White")
The allocation of a 8-wire RJ45-output to different 4-wire applications: 2 x 10/100 BaseT, 2 xToken Ring, 10/100 BT/ISDN
Connection cable 15 cm long, strain-relieved
RJ45-plug with locking lever protection
Molded Bend protection
If all available connections in a data network are busy, problems occur at the latest when new subscribers are added. One solution would be to lay additional cables, install additional distribution panels and boxes. But this is very complex because of the usually poor accessibility to the installation channels.
The Modular T-Adapters allow a doubling of the connections by cable sharing without intervention in the existing network structures. Important: One adapter each must be plugged into the patch distribution board (2 inputs from the hub/switch) and into the connection box (2 outputs to the terminals)!
The adapter, installed in a plastic housing, splits an 8-core connected RJ45 output into two sockets with 4-core contact assignment each. The 15 cm long connection cable is connected to an RJ45 plug which is plugged into the output of the socket or distributor. The connection cables to the subscriber or to the next distributor socket are then plugged into the two RJ45 sockets on the adapter output. The outputs to the subscribers are marked by coloured plug-in symbols for data or telephone connection. A label under a transparent cover provides space for marking the outputs. There is a label on the underside of the adapter housing indicating the contact assignment, so that the distribution structure can be traced during further interventions.
Halogen-free plastic housing, color light gray RAL 7035
Identification of the outputs by inserted color symbols for data or telephone
Labelling field with clear window
Circuit diagram sticker on the bottom
Please check the adapter pin layout. Depending on use, required pin layouts may differ.
04018359227364, 04016138820737, 4018359227364, Telegärtner, 100023150
