Plastic material (PP and ABS)Cable length 2.5 m (2 x 0.5 mm²) Oil flex 108NC contact / NO contact – by turning the float switch you get the reverse contact functionSuitable for all liquids with a density of at least 0.7 g/ cm³ e.g. water, heating oil, diesel, vegetable oil, lubricating oils, among others
The plastic folding float switch (PP and ABS) is reliable, maintenance and wear-free and can be mounted "from the inside" in a tank, canister, etc. This switch is built by IT: A reed contact is soldered with the high-quality cable and cast together in the shaft with Wepuran®. With the 230-volt version, which is not primarily intended for use with Schabus water detectors, you can switch a 230-V relay directly in the fuse box.The fold-over float switch 230 Volt may only be used in circuits that are protected by an FI switch.
Schabus, 300949
