Dieses Angebot gilt nur für Geschäftskunden
Dieses Angebot gilt nur für Geschäftskunden
-
Produktbeschreibung
Überblick
1 - 80 V / 0 - 70 A
350 W
RS-485, RS-232C, GPIB, USB, LANBeschreibung
The PEL-2000B Series includes a number of protection modes: Over Current Protection (OCP), Over Voltage Protection (OVP), Over Power Protection (OPP), Reverse Voltage Protection (RVP), and Under Voltage Protection(UVP). The protection modes are useful to protect both the load modules and the DUT(s). A buzzer can be set for when a protection setting has been tripped. When a protection mode has been tripped, the load unit will display an alarm and stop sinking current/voltage. When a load unit is operating in CR or CV mode, the unit may need Over Current Protection to prevent excessive current being sunk. Over Current Protection stops the load from sinking more current than its recommended limit and prevents the load from burn-out damage. Over Voltage Protection is used to limit the amount of voltage sunk. If the OVP trips, the PEL-Series load will stop sinking voltage. Over Power Protection is used when the input power exceeds the specifications of the load. When OPP is tripped, the power will cease to be sunk. Reverse Voltage Protection prevents reverse voltage damage to the PEL-2000B Series up to the specified rating. When Reverse Voltage Protection has been tripped, an alarm tone will sound until the reverse voltage is removed. Under Voltage Protection will turn off the load when the voltage drops below a set limit.
Stichwörter
GW Instek, 01EL240B00GT, PEL-2040B, netzgerät, labornetzgerät, programmierbares labornetzgerät
-
Produktdaten
-
Downloads
-
Bewertungen