VOLTCRAFT VC40 Mains outlet tester CAT II 300 V

Overview

Automatic test run
Finger contacts for Earth Conductor Test and FI testing
FI/RCD-Test with 30 mA
Acoustic signals

Description

The socket tester enables fast and safe testing of sockets. Check the wiringThe socket is checked for possible installation errors like swapping wires and breaks. The test result will be displayed optically and acoustically. If the wiring is okay, a permanent tone will be emitted and all LEDs will show the green light. Fault current protection testBy means of the contact contact, the inspection of the fault current protection is started. Residual current circuit breakers (FI) can be tested with a tripping current of 30 mA or more. The triggering time is automatically limited to 300 ms. This test can only be started to protect against personal injury and property damage if the device detects correct wiring.Hazard pulsating warning toneIn addition to the LED status display, a pulsating warning sound is generated in the event of dangerous errors. Missing, for B. The protective conductor (PE) or the voltage drop between PE and N is too large, the pulsating warning signal helps to detect the problem immediately. The same happens if the residual current circuit breaker (FI) does not trigger as prescribed.

Characteristics

3 LED displaysAcoustic indicationFI test buttonContact electrode

Delivery content

• Power outlet tester VC40
• User manual.

Keywords

04016139146515, VOLTCRAFT, VC40, voltkraft