Overview
Controls up to 2048 RGB or 1536 RGBW LEDs
All LEDs can be switched independantly of each other
Update rate of up to 100Hz possible for each LED
TinkerForge 2103 LED module Suitable for (single board PCs) TinkerForge 1 pc(s)
Product description
Description
The LED Strip Bricklet 2.0 can be used to control LED strips and LED pixels that are equipped with a WS2801, WS2811, WS2812/SK6812 (NeoPixel RGB), SK6812RGBW (NeoPixel RGBW), LPD8806 or APA102 (DotStar) LED driver. It is possible to control 2048 RGB or 1536 RGBW LEDs (6144 individual LEDs) independantly of each other via a brick.
With the help of the API, all LEDs can be controlled simultaneously with a fixed update rate of up to 100Hz.
The LED Strip Bricklet 2.0 has a 7-pin Bricklet plug and is connected with a 7p-10p Bricklet cable with a brick.
Characteristics
Supported LED drivers: WS2801, WS2811, WS2812/SK6812 (NeoPixel RGB), SK6812RGBW (NeoPixel RGBW), LPD8806 and APA102 (DotStar)
Power consumption: 64mW (12.8mA at 5V)
Resolution: 8bit per LED
Maximum number of LEDs: 6144 (2048 RGB or 1536 RGBW LEDs)
Maximum refresh rate: 100 updates per second
Keywords
TinkerForge, 2103, Bricklet
