Overview
4 digital inputs
Input voltage up to 36V (DC)
Electrically isolated
TinkerForge 2100 Expansion board Suitable for (single board PCs) TinkerForge 1 pc(s)
38,99 €
VAT included
plus
Environmental tax included 0,02 €
Delivery time:
2-3 days
in stock
Free return shipment until 31.01.2026
38,99 €
VAT included
plus
Environmental tax included 0,02 €
Product description
Description
The Industrial Digital in 4 Bricklet 2.0 can be used to expand bricks with four digital inputs. The input voltage can be up to 36 volts (DC). The galvanic isolation of the inputs allows use without direct electrical connection, so that ground loops can be avoided and an additional safety is ensured.
Typical applications can be found in the control of industrial products, such as PLCs or frequency converters. In addition, it makes sense to use the device in areas where different ground potentials may not be connected.
The Industrial Digital in 4 Bricklet 2.0 has a 7-pin Bricklet plug and is connected with a 7p-10p Bricklet cable with a brick.
Characteristics
Power consumption: 28mW
(5.6mA at 5V) Input type: Four opto-coupled inputs (4,7kΩ series resistor included)
Input current: Depending on the input voltage: Approx. 1mA/5V, approx. 5mA/24V
maximum input voltage: 36V (DC)
Low level voltage: 0-2V
High level voltage: 3-36V
Isolation: 5000Vrms (Optocoupler data sheet data)
Keywords
04251640702403, TinkerForge, 2100, Digital In 4 Bricklet
Product specifications
Downloads
Reviews
{{#if results}}
{{/if}}
{{results.[0].headline}}