ACV

Logo
Speech microphone ACV 58-1000-02
Clip-on lavalier microphone with foam windscreen, long cable and 3.5 mm plug, shown with mounting clip and small adapter.
  • The omni-directional capsule provides uniform sound recording, thus ensuring consistent voice recording from different positions. Multiple mounting options (screw, glue and clamp) allow concealed installation for unobtrusive installation. The accompanying foam wind protection and the discrete design reduce wind sounds and visual disturbances in interviews or live performances. The extended cable enables a remote placement from the recording device or transmitter and thus simplifies the cable routing in complex setups.
CHF 8.05
VAT included
plus
Delivery time: 3-4 days
in stock
ACV 151000-12 Car audio universal antenna
ACV 151000-12 Car audio universal antenna
Roof antenna / universal antenna ON/FM ON/FM passive Location: Roof / fenders / universal bore:antenna base: Antenna rod l...
CHF 8.85
VAT included
plus
Delivery time: 3-4 days
in stock
ACV Steering wheel control interface
Car stereo wiring adapter kit with color-coded harnesses, connector blocks, and an ACV interface box on a white background.
  • The adapter interface for steering wheel remote control signals converts the factory control elements into standardized ISO signals, thus enabling the steering wheel remote control to be maintained when the radio is replaced. It is designed for vehicles with five steering wheel functions and ensures that each button is assigned to the corresponding retrofit function to ensure consistent operation. Compatibility with Blaupunkt 1-DIN OEM radios enables direct connection to the original radio harness, WAS simplifies installation and minimizes cabling overhead. The vehicle-specific fit for selected Nissan models reduces the installation time through the consistency of plug assignment and pin assignment in the vehicle.
CHF 31.15
VAT included
plus
Delivery time: 3-4 days
in stock
ACV Steering wheel control interface
Car stereo wiring adapter kit with multiple colored harness connectors and a black acv module box.
  • The ISO adapter interface enables the conversion of the steering wheel remote control signal and thus the receiving of the original steering wheel remote control while installing retrofitted car radios. Electrical compatibility with the +12-volt ignition connectors ensures that the adapter is activated via the vehicle power supply, WAS simplifies integration and reduces installation steps. Designed for vehicles with certain original Ford radios, the adapter enables direct connection to the 5000C/6000CD/6006CD systems, eliminating the need for special cable harnesses. The vehicle-specific fit for different Ford models ensures the correct pin assignment and plug geometry, whereby the splitting of cables is avoided and the original cable harness guide remains intact.
CHF 35.00
VAT included
plus
Delivery time: 3-4 days
in stock
ACV 281300-11 Car stereo DIN faceplate Compatible with: Toyota
  • (1)
Black plastic adapter for radio fascia, rectangular opening, for integrating car radios into vehicle dashboards.
Radio-beaming 1-DIN many car manufacturers use their own vehicle-specific radios, which are optically adapted to the cente...
CHF 6.95
VAT included
plus
Delivery time: 3-4 days
in stock
ACV Steering wheel control interface
Car stereo wiring harness adapter with two connector plugs, loose color-coded wires, and a small black 'aCV' control module.
  • The steering wheel remote control enables the maintenance of the factory-made control elements and thus the response of the retrofit radios to the steering movements of the original manufacturer. The ISO connector geometry matches the standard harness layouts, WAS simplifies cabling and reduces installation time for audio upgrades. Compatibility with various vehicle platforms supports the integration with MIB-PQ and various OEM navigation devices, thus enabling the use in vehicles with original radios. Thanks to the quad-lock adapter (40-pin/52-pin), connection to vehicles is possible with modern harness systems, whereby additional adapters for vehicle functions can be used if needed.
CHF 56.65
VAT included
plus
Delivery time: 3-4 days
in stock
ACV 381094-39-1-1 Car stereo bracket
Car stereo dash kit with black rectangular trim bezel, two silver mounting brackets, and screws on a white background.
  • The 2-DIN mounting frame geometry offers a standardized double-DIN format for the mounting of retrofit car radios and thus simplifies the installation in compatible dashboard. The opening size is matched to the conventional double DIN devices, so it ensures a tight fit and precise orientation when installing. This minimizes play and misalignment. The black surface fits harmoniously into the factory's interior and ensures a uniform appearance of the dashboard. The vehicle-specific compatibility makes it possible to install in appropriate dashboard boards of vans and MPVs, thus making it easier to retrofit audio devices.
CHF 31.00
VAT included
plus
Delivery time: 3-4 days
in stock
ACV Steering wheel control interface
Car stereo wiring harness kit with two connector plugs, loose color-coded wires, 3.5 mm jack lead, and a black ACV interface module.
  • The steering wheel remote control interface allows OEM remote control functions to be retained when replacing radios in supported Ford models. CAN bus compatibility ensures communication with vehicle networks and allows signal translation for systems using CAN protocols. It was developed for vehicles without +12V ignition connection (pin 16) to balance connection differences during installation and to reduce the need for cable changes. It is compatible with select OEM audio/navigation devices from Sony and Ford and allows integration with factory radios with front card slots or certain radio devices.
CHF 58.00
VAT included
plus
Delivery time: 3-4 days
in stock
ACV Steering wheel control interface
Assorted car stereo wiring harness adapters and an aCV audio interface module with multicolored cables on a white background.
  • The vehicle-specific ISO adapter geometry enables a direct plug-and-play connection for compatible cable harnesses of Lexus and Toyota and thus simplifies the installation. The optimized plug arrangement receives the original pin allocation of the radio connection and thus reduces the installation time when installing retrofitted car radios. Thanks to its compact design, the adapter is suitable for confined spaces in the dashboard and enables easy cable routing behind the factory panel when replacing the factory radio. The adapter is suitable for different Toyota and Lexus models and can thus be used for a variety of upgrade projects.
CHF 41.00
VAT included
plus
Delivery time: 3-4 days
in stock
ACV 381040-02-1 Car stereo bracket
Assorted metal mounting parts for a car stereo install kit, including a silver housing, black trim frame, brackets, plates, and screws on a white background.
  • The 2-DIN installation dimension allows the installation of double height car radios and provides a clean and secure mounting solution for standard car radios. The installation shape is matched to the openings in the dashboard, WAS simplifies mounting and ensures the stability of the chassis during installation and removal. The compatibility profile supports a wide range of dashboards, reducing the need for adapters when replacing the factory radio. The black factory color matches the OEM interior and keeps the appearance of the dashboard after installation.
CHF 28.95
VAT included
plus
Delivery time: 3-4 days
in stock
ACV 12-1196-46-15 CAN bus kit Compatible with: Mercedes Benz, Volkswagen
Blue electronic connector adapter with colourful cables and multiple plugs for connection in a vehicle.
Can Bus Kit Mercedes / VW Quadlock-/Power + Loud speaker (ISO) + DIN Antenna connection If the OEM radio installed ex-fact...
CHF 62.00
VAT included
plus
Delivery time: 3-4 days
in stock
ACV ISO car radio cable
Car stereo wiring harness with multiple color-coded connector plugs and bundled wires on a white background.
  • The ISO adapter cable makes possible a direct connection of car radios and thus a simple installation without cable connections Compatibility with ignition and light circuits connects terminals 15 and 58 to the radio, ensuring correct power supply and lighting. The vehicle-specific interface is tailored to the cabling of different Opel models and simplifies the integration in the factory wiring harnesses. The compact plug geometry makes a clean cable guide in the dashboard and minimizes thus interference with other components during installation.
CHF 8.75
VAT included
plus
Delivery time: 3-4 days
in stock

Take a cookie and let’s go

Language

Deutsch
English
Français

We use cookies and other technologies ("cookies etc.") to provide you with the best experience on our website. If you opt out of tracking, we will only use necessary cookies etc. that are required for the basic functionality of our website.
We have implemented technical and administrative security measures to protect your data against loss, destruction, manipulation and unauthorised access.

Choose according to your preferences :
Functional

This type of cookie etc. allows us to perform anonymous analysis activities to gain a better understanding of how our website is generally used. This allows us to make necessary and functional performance and design improvements to the website.

Marketing

We use cookies etc. from various marketing service providers to enable us to present you with suitable product offers and display third party offers. In addition, we would like to show you only advertisements that you are actually interested in on platforms of selected marketing partners and social networks.

All of the above

By clicking on "Accept", you voluntarily agree to the above data processing.
In addition, you can revoke and adjust consent at any time by accessing our privacy policy.